Get track saw precision without sacrificing money, time, and space. The BORA 5-piece NGX Clamp Edge System has everything you need to rip, crosscut, and break down plywood sheets with your circular saw, jigsaw, or router. This deluxe five-piece set includes (1) 50in Clamp Edge, (1) 50in Clamp Edge Extension, (1) Pro Saw Plate, (2) Non-Chip Strip Rolls, and (2) Track Clamps.

This BORA kit is a great option for serious woodworkers, construction professionals, and DIY enthusiasts. It has enough length to handle most cutting needs and jigs for making miter cuts and circular saw cuts easier. Get 100 inches of total cutting length with the 50-inch clamp and a 50-inch extension. The saw plate fits into the two T-channels in the clamp and attaches to a circular saw for precision cutting. It also includes two rolls of non-chip strip tape for minimizing tear-out while cutting and two guide clamps that easily attach to the edge of the clamp so you can cut any angle. BORA Tool is a global manufacturer of power tool accessories and a leader in innovative products that make your projects run smoothly.

• TRACK SAW PRECISION: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time
• 100” OF CUTTING CAPACITY: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension.
• STOP THE GUESSWORK: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.
• REDUCE TEAR OUT: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish
• CUT ANY ANGLE: Attach the additional two Track Clamps to the Clamp Edge for pro level angle cutting capability

Includes:

• 50" Extension with Connectors: The NGX extension will add 50-inches of straight cutting to the NGX clamp edge - up to 100-inches. The connectors are included so you can easily attach the extension to the clamp edge.
• 50" Clamp Edge: Made of heavy-gauge, rigid aluminum for extreme durability, the NGX clamp edge has a locking end that moves with the handle so you are able to make adjustments from one side.
• Pair of Track Clamps: Track clamps fit into the WTX or NGX Clamp Edge to make a more versatile system. You are able to make any angle quickly and accurately.
• Saw Plate and Non-Chip Strip: The Saw Plate and Non-Chip Strip work together to save boards from tear-out. Simply press this self-adhesive strip onto the Clamp Edge and cut—this trims down the excess width of the strip so the edge of the Non-Chip Strip sits flat against your blade. For every future use, just line up the strip to your measuring mark for accurate, clean results.

Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item

Warranty: Bora 1-Year Limited