DEWALT DWMT70773L Impact Wrench w/Hog Ring, 1/2in

1/2" drive... I was concerned that my compressor wouldn't run this tool as I needed it to do. I bought this basically to remove a wheel from my car from time to time. My compressor is a 10-gallon, 135 PSI that puts out 4 SCFM at 90psi... I ran the compressor until it shut off at 135psi. Hooked up the impact gun to my 3/8" air hose and it had no problem putting out the needed air to remove 5 lug nuts on my car. In fact, the compressor never kicked on while I removed the lug nuts. This impact gun zipped off the lug nuts with no trouble at all. This gun is quality and power in one unit. I wanted to post info about my compressor size because I didn't see many reviews that talked about compressors used with this tool. If you have a smaller sized compressor similar to mine and you're wondering if it'll work, it will definitely run this tool on lug nuts. Another note is that this came with a 1/4 in NPT male fitting to use with the air gun, however, I always like to use Milton fittings on my air tools. They are high quality, and I never had a problem with any Milton fittings. So instead of using the fitting that came with this gun, I installed a Milton (V-style) fitting. The V-styles are considered 'high flow' fittings. I don't know if this made a difference in how the tool worked for me because I didn't try it with the standard flow fitting that came with it but I think it would be fine. If not you can always pick up a V-style Milton fitting for a few bucks if needed.... I hope this review helps. I recommend this impact wrench for anyone looking for a well built and highly capable impact wrench.