LC-dolida Mask with Bluetooth Headphones

I listen to audio to fall asleep, and have tried MANY sleep masks with headphones. My biggest beef was that, as a side sleeper, I'd wake up with my ears in pain from laying on the rigid pads they'd put around the little speakers. Decided to give this one a try, and hallelujah, this different design (no rigid pieces around the speakers, so it just lays flat, and is a soft cloth wrap) was SO much more comfortable. However, the design is flimsy, and that's a big ole problem. The USB charger wire comes out of the top of the mask through an unstitched opening about 2" wide (there's inexplicably the same opening on the other side, where there is no wire coming out). This means you either have a long cord flopping around when you're using them, or you tuck the cord back in that opening when you're using them and it keeps coming out (or it's difficult to dig back out when you need it). I see no good reason why these openings couldn't be stitched up and some kind of small gromet could hold that USB cable in place with a short line so it doesn't get under you or fall in your face while sleeping. The flimsy design therefore also exposes the tiny little wires that run between the speakers through the mask, making those vulnerable to breakage too (and if that happens, this is just trash). You sure don't want to move those around to adjust the speaker location for your head size (an easily fixed challenge). The 3 flat buttons at the top (pause/play, jump to next track, etc.) have "click" vs. "press and hold" options, but only a couple options consistently work. Finally, there is a picture showing that the position for the mask should be level on the head to best hear the speakers (and they're surprisingly good in this position). The only problem is the back of your head is not level, it curves in. So you are constantly adjusting the mask to try to keep it level and the speakers in the correct position to be full volume. Doesn't work even if you tighten the headband. So a big improvement over the others, but for this not-cheap price and value, I couldn't recommend these until they get the quality and durability up a little higher. I think this could ultimately be a GREAT product with just a few more design fixes. Hope this is helpful.