Free shipping for Prime members. Learn more

M-Audio Studiophile DSM1 High-Resolution DSP Reference Monitor with 6.5-Inch LF Driver

Condition Refurbished

Quantity Limit 3 per customer

Sold Out

The Woot-Off is dead, but these deals live on!

Yo Ho! A Pirate-Themed Woot Off For Me!

1” Teteron soft fabric, high-frequency dome with Neodymium magnet and ferrofluid cooling—accurate to 27kHz
6.5” custom low-frequency driver with anodized aluminum cone provides exceptionally low distortion
Onboard DSP manages the complex digital crossover for pristine imaging
DSP-based EQ and Acoustic Space Controls optimize frequency response for any production environment
Bass-reflex port delivers controlled extended bass response
High-density cabinet yields good damping and reduced acoustic interference
Professional digital inputs (up to 24-bit/192kHz): S/PDIF and AES
Balanced analog inputs: XLR and 1/4”
Bi-amplified with Class D power amps: 100 watts (low frequency) and 80 watts (high-frequency)

Shipping Note: Shipping to Alaska and Hawaii is not available for this item

Warranty: 90 Day Avid

Specifications:
Frequency Response:	49Hz - 27kHz
Peak SPL at 1 Meter:	110dB
Low-Frequency Driver:	6.5” Domeless Anodized Aluminum Cone
High-Frequency Driver:	1” Soft Teteron Dome with Neodymium Magnet and Ferrofluid Cooling
Crossover Frequency:	2.7kHz @ 24dB/octave
HF Shelf:	+1.5dB, -1.5dB, -3.0dB
Mid EQ:	+1.5dB, -1.5dB, -3.0dB
High-Pass Filter:	40Hz, 60Hz, 80Hz, 100Hz @ 12dB/octave
Acoustic Space Control Filter:	-1.5dB, -3.0dB, -4.5dB
Desk EQ Filter 1:	-1.0dB, -2.0dB, -3.0dB @ 220Hz
Desk EQ Filter 2:	-1.0dB, -2.0dB, -3.0dB @ 175Hz
Desk EQ Filter 3:	-1.0dB, -2.0dB, -3.0dB @ 200Hz
Analog Inputs:	XLR Balanced and ¼” Balanced
Digital Inputs:	S/PDIF and AES/EBU
Input Impedance:	20k ohm
Input Sensitivity:	+4dBu Yields 90dB @ 1 Meter (Trim Level Set to 0)
Gain Trim:	Volume Trim from -22dB to +10dB

Analog-to-Digital:
Maximum Input Level:	18dBu
Signal-to-Noise Ratio:	102dB (A-Weighted)

THN + Noise:
Conversion Rate:	96kHz

In the box:

M-Audio Studiophile DSM1 High-Resolution DSP Reference Monitor with 6.5-Inch LF Driver
AC Power Cable
(4) Acoustic Isolation Pads

Specifications:
Frequency Response:	49Hz - 27kHz
Peak SPL at 1 Meter:	110dB
Low-Frequency Driver:	6.5” Domeless Anodized Aluminum Cone
High-Frequency Driver:	1” Soft Teteron Dome with Neodymium Magnet and Ferrofluid Cooling
Crossover Frequency:	2.7kHz @ 24dB/octave
HF Shelf:	+1.5dB, -1.5dB, -3.0dB
Mid EQ:	+1.5dB, -1.5dB, -3.0dB
High-Pass Filter:	40Hz, 60Hz, 80Hz, 100Hz @ 12dB/octave
Acoustic Space Control Filter:	-1.5dB, -3.0dB, -4.5dB
Desk EQ Filter 1:	-1.0dB, -2.0dB, -3.0dB @ 220Hz
Desk EQ Filter 2:	-1.0dB, -2.0dB, -3.0dB @ 175Hz
Desk EQ Filter 3:	-1.0dB, -2.0dB, -3.0dB @ 200Hz
Analog Inputs:	XLR Balanced and ¼” Balanced
Digital Inputs:	S/PDIF and AES/EBU
Input Impedance:	20k ohm
Input Sensitivity:	+4dBu Yields 90dB @ 1 Meter (Trim Level Set to 0)
Gain Trim:	Volume Trim from -22dB to +10dB

Analog-to-Digital:
Maximum Input Level:	18dBu
Signal-to-Noise Ratio:	102dB (A-Weighted)

THN + Noise:
Conversion Rate:	96kHz

In the box:

M-Audio Studiophile DSM1 High-Resolution DSP Reference Monitor with 6.5-Inch LF Driver
AC Power Cable
(4) Acoustic Isolation Pads

12	1	2	3	4	5	6	7	8	9	10	11	12	1	2	3	4	5	6	7	8	9	10	11
0%	0%	0%	0%	0%	0%	100%	0%	0%	0%	0%	0%	0%	0%	0%	0%	0%	0%	0%	0%	0%	0%	0%	0%

zero wooters wootinglots of wooters wooting

Deals our customers love best.

Like what you see? There are more best sellers to explore. Start browsing