Warranty: 90 Day Philips

Features:

• LED Technology providing a robust and a safe solution. Fit and forget for life.
• Do-It-Yourself Kit including all necessary components. Also includes step-by-step installation guide for an easy install experience
• Provides warm and soothing light for decks, steps, and add safety by highlighting pathways.
• Easy on/off with remote control.
• Weatherproof for added durability and long life. No fire hazard
• 10 white LED lights add accent and safety to your deck (not for use with submersible fixtures)
• Clear polycarbonate lens with a frosted finish
• Die-cast aluminum with matte painted finish
• 22 gauge stranded copper with sunlight resistant PVC to UL1007 wire leads
• Color coded to indicate polarity and color of light

Light Module:

• LED color, Blue – 470nm
• Forward voltage: 12VDC
• Forward current: 20mA
• Beam Angle: 40 degrees typical
• Lens Diameter: .725”
• Face Diameter: 1.110”
• Maximum Overall Length: 1.410”
• Body Diameter: .720”

Driver Box:

• Housing: Cover and enclosure: Black, sunlight resistant plastic, UL94 V-0. Sealing gasket: Cast neoprene ring
• Power Cord: 10 gauge stranded copper, sunlight resistant PVC type STJW
• Power Cord Connector: Black, 2-prong plug type 1-15p molded onto power cord, for use in 120 VAC, 15 Amp circuits. Contains removable glass tube fuse. Suitable for use in United States, Canada, and Mexico
• Hook-up Extension Cord: 18 gauge stranded copper, sunlight resistant PVC type STJW
• Environmental Sealing: Weather resistant assembled driver box

Wire Connector:

• Connector Type: IDC (Insulation Displacement COnnector) Line Tap, connector cavity is grease filled to maintain weather resistant rating, 3M’s Scotchlok types UB2A & UR2 equivalent

System Electro-Environmental Characteristics:

• Driver Input: 110/120V, 50-60Hz
• Driver Output: 9VDC, 500 mA, 4,5 W @ maximum load, Class 2
• Operating Temperature: -30°C to 60°C or -22°F to 140°F
• Non-operating Temperature: -40°C to 75°C or -40 F to 167°F
• Operating Range, Remote control: Up to 10m or 40 ft
• Operating Frequency, Remote Control: 433 MHz
• Battery, Remote Control Unit: Type 23A (12v Alkaline)

What You Will Need:

• Power Drill
• 1-1/8” spade bit
• 3/4” spade bit
• (2) #8×1” Wood screws
• Screwdriver
• Pliers
• Tape Measure
• Clear silicone caulk or sealant
• Eye protection
• Straight edge
• Cable staples or clips

In the box:

• 10 LED Deck Lights
• Weatherproof LED Driver
• 24 Cable connectors
• 60’ of hookup cable
• Remote Control